Plate Heat Exchanger
Data Sheet Model: 522
Product Range : 522 Plate Part No : 522/1
Product Range : 522 Plate Part No : 522/1
Standard Design
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled betweeen a fix frame plate and
a movable pressure plate and compressed by tightening bolts.The plates are fitted with a gasket which seals the interplate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The plate and the pressure plate are suspended from anupper carrying bar and located by a lower guiding bar, both of which are fixed to a support column.Connections are located in the frame plate or, if either or both fluids make more than a single
Working Principle
Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current fl ow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence,resulting in efficient heat transfer.
Frame Types :
• Painted Frame with Carbon Steel Connection
• Painted Frame with Stainless Steel Connection
• Stainless Steel Frame with hygenic connection
• Stainless Steel Frame with threaded connection
Plate Types :
• Flow Plate
• End Plate
Plate Material :
• AISI 316
• Titanium
• CTX
Plate Thickness :
• 0,5 mm
• 0,6 mm
Gasket Material
• NBR Clipped
• EPDM Clipped
• Slicon Clipped
• Viton Clipped
Temperature Limits
NBR Gaskets: Max : 115 C
EPDM Gaskets Max : 150 C
SLICON Gaskets Max : 200 C
VITON Gaslets Max : 225 C
Frame Specifition :
Lenght : 1084 mm
Width: 470 mm
Weight: 220 kg
Plate Specification:
Length : 890 mm
Width : 380 mm
Weight: 1,40 kg ( 0,5AISI
316)
Angle : 30-60 Degree
Flow Type : Parallel
Gasket Type : Clipped
Connection : 100 mm
Gap : 3,45 mm
Max Flow Capacity : 170 m^3/h
Nom Comp. Pitch :3,9 mm
Plate Removal Distance: 300 mm
Pressure Ratings :
Standart Frame with 0.5 mm plate :
Max Design Pressure : 16 Bar
Max Test Pressure : 21 Bar
Max Differential Pressure : 18 Bar
High Preformance Frame with 0.5 mm plate :
Max Design Pressure : 21 Bar
Max Test Pressure : 25 Bar
Max Differential Pressure : 18 Bar
MIT 522 Plate Heat Exchanger
| Next > |
|---|
